11. To test for a properly tightened
Harness, pinch the shoulder
strap. A snug Harness should not
allow you to pinch any slack when
pinched between your thumb and
forefinger. If needed, pull adjuster
strap further for a tight and proper
fit.
12. Verify that the seat recline angle is
correct:
If installed with the base, check
that the bubble is in the blue zone
on the recline indicator A.
If installed without the base,
ensure that the level line on the
shell is level with the ground B.
Securing the Child
A
LEVEL
ZONE
B
ZONA
NIVEL
119