Evenflo Shyft DualRide Manual Del Propietário página 64

Before installing the base, make sure:
• the vehicle is on level ground.
• the wheel wells (pg. 51) are installed
if being used.
the LATCH/UAS connectors are
•
properly stored (see pg. 48).
1. Place the base on the vehicle seat.
2. Pull Recline Foot Release Handle
on base to raise or lower the
5-position recline adjustment foot
until the bubble is in the blue zone
on the recline indicator (pg. 119).
64
Installing the Convenience Base to the Vehicle
Installing the Base with Lap Belt Only