Idiomas disponibles
Idiomas disponibles
9. Grab base near belt path and pull
side to side and front to back to
make sure base is installed tightly.
Base should not move more than
2.5 cm (1 in) side to side or front to
back at the belt path.
If base moves more than 2.5
cm (1 in), open LockStrong arm,
tighten LATCH/UAS strap a little
more, and try again. If base still
moves too much, you may need to
try a different vehicle seat location,
installation method, or both.
56
Installing the Convenience Base to the Vehicle
Installing the Base with LATCH/UAS
