Idiomas disponibles
Idiomas disponibles
15. Electrical connection
The electrical motor installed is connected and
ready for operation. The connection complies
with the applicable European standards. The
customer's mains connection as well as the ex-
tension cable used must also comply with these
regulations.
m ATTENTION! The power supply cord of this ma-
chine has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an
appropriate outlet which is properly installed and
grounded in accordance with all local codes and or-
dinances.
m WARNING! Check the voltage! The voltage must
comply with the information on the rating label!
The customer's mains connection as well as
the extension cable used must also comply with
these regulations.
Damaged electrical connection cable
The insulation on electrical connection cables is of-
ten damaged.
This may have the following causes:
• Passage points, where connection cables are
passed through windows or doors.
• Kinks where the connection cable has been im-
properly fastened or routed.
• Places where the connection cables have been cut
due to being driven over.
• Insulation damage due to being ripped out of the
wall outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not
be used and are life-threatening due to the insula-
tion damage. Check the electrical connection cables
for damage regularly. Make sure that the power is
switched off before inspecting the cable. Electrical
connection cables must comply with the applicable
European standards and must be correctly marked.
Only use connection cables with the marking
''H05VV-F''.Replacement cables can only be fitted
by an approved and certified electrician. If you are in
any doubt please contact the help line at the foot of
this page.
AC motor
• The mains voltage must be 220 - 240 V~.
• Extension cables up to 25 m long must have a
cross-section of 1.5 mm
.
2
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate
16. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be re-
used or recycled. The equipment and its ac-
cessories are made of various types of ma-
terial, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of
waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment. By properly
disposing of this product, you are also contributing
to the effective use of natural resources. You can
obtain information on collection points for waste
equipment from your municipal administration, pub-
lic waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equip-
ment or your waste disposal company.
www.scheppach.com
GB | 37
