Idiomas disponibles
Idiomas disponibles
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability law the
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non-authorised skilled work-
ers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-com-
pliance with the electrical specifications and regu-
lations.
Recommendations:
Read the entire text of the operating instructions prior
to the assembly and operation of the device.
These operating instructions are intended to make it
easier for you to get familiar with your device and uti-
lise its intended possibilities of use.
The operating instructions contain important notes on
how to work safely, properly and economically with
your machine and how to avoid dangers, save repair
costs, reduce downtime, and increase the reliability
and working life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable reg-
ulations of your country with respect to the operation
of the machine.
Put the operating instructions in a clear plastic folder
to protect them from dirt and humidity, and store them
near the machine. The instructions must be read and
carefully observed by each operator prior to starting
the work. Only persons who have been trained in the
use of the machine and have been informed on the
related dangers and risks are allowed to use the ma-
chine. The required minimum age must be met.
In addition to the safety notes contained in the pres-
ent operating instructions and the special regulations
of your country, the generally recognised technical
rules for the operation of identically constructed ma-
chines must be observed.
28 | GB
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
2. Layout (Fig. 1-3)
1 Spray hose
2 Trigger guard
3 Trigger
4 Nozzle guard
5 Spray tip
6 Spray gun
7 Spray gun handle
8 Stand
9 Pressure control dial
10 Return hose
11 Suction hose
12 Hose clamp suction hose mesh filter
13 Suction hose mesh filter
14 On/Off switch
15 Suction hose inlet port
16 Hose clamp suction hose inlet port
17 Power cord
18 Spray hose outlet port
19 Prime/spray lever
20 Return hose inlet port
21 Hose clamp return hose inlet port
22 Filter holder
23 Trigger locking lever
24 Trigger guard holder
25 Spray hose inlet port
26 Mesh filter handle
27 Spacer bolt
28 Sealing
29 Retaining nut
3. Scope of delivery
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
m ATTENTION! The device and packaging mate-
rials are not toys! Children must not be allowed to
play with plastic bags, film and small parts! There
is a risk of swallowing and suffocation!
www.scheppach.com
