Switching On And Off Your Midland Btx2 Pro; Operative "Mode; Maximum Distance; How To Pair Two Midland Btx2 Pro Units - Midland BTX2 PRO Manual De Instrucciones

Fitting and removing your Midland BTX2 PRO
The BTX2 PRO can be easily fitted onto the helmet by sliding it downwards on the sliding
mounting kit. BTX2 PRO is maintained in position thanks to the fixing clip located on the
upper section (A).
To detach the BTX2 PRO, simply press the fixing clip and push the unit upwards.
Lock

Switching ON and OFF your Midland BTX2 PRO

Switching the unit on:
Press and hold "Middle" button for approximately 3 seconds until the BLUE indicator
lights.
Switching the unit off:
Press and hold both "Middle" and "Backward" buttons together for approximately 3 se-
conds until the RED indicator flashes 3 times, thus lessening the chances that you might
turn off the unit accidentally (especially whilst wearing gloves).

Operative "mode"

The BTX2 PRO can operate in three main "mode": Intercom, Phone and FM Radio.
The 3 multi function buttons can have different functionality depending on which mode
the unit is at that moment.
› In "Intercom mode" the three buttons let you manage the Intercom communications
between driver and passenger or bike to bike.
24
› In "Phone mode" you can manage your Bluetooth mobile phone to place/answer a
phone call or to listen to the music or GPS App. announcement (in stereo mode).
Please use your phone responsibly and safely.
› In "FM Radio mode" you can listen to your favourite radio station in stereo, seek for a
specific radio station and save it (6 memories are available).
You can switch (toggle) from one mode to the other simply pressing the Middle button
A
for 3 seconds. A voice announcement will tell in which mode you are on.
The toggle sequence is the following:
› Intercom mode (if another unit has been paired)
› FM Radio
› Phone mode (if a phone has been paired)
Every time you turn on the unit, the default mode is the last used mode.
The Intercom mode and Phone mode are avalaible only if it was previously paired to
another unit or to a phone.
Unlock
If you need to know in which mode the unit currently is, just press the "Volume + " and
"Volume –" buttons together. A voice announcement will tell you the current mode.

Maximum Distance

You can reach 1 Km intercom distance if you are in line of sight without ob-
structions and interferences (the riders must be always in sight).

How to pair two Midland BTX2 PRO units

The two units supplied in the same Midland BTX2 PRO box, are already paired and ready
to use, which mean you don't need to perform this procedure. The units are already pai-
red using the Middle button.
If the devices are not part of the same kit, or the units have been purchased separately,
you need to first pair it in order to use it.
To pair the Midland BTX2 PRO to another Midland BTX2 PRO unit
To pair the Midland BTX2 PRO to another Midland BTX2 PRO unit, you must first enter
the setup mode:
www.midlandeurope.com