KNF LABOPORT SC820G Manual De Instrucciones página 165

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 326
Vacuum system SC820G / SC840G
Translation of Originial Operating Instruction, KNF 339416-339418 02/23
Removing and returning the vacuum controller
Removing the vacuum controllerfrom the charging cradle:
Take the vacuum controller out of the charging cradle.
Returning the vacuum controller to the cradle:
Place the vacuum controller in the support for the vacuum
controller (Fig. 13/2) with the underside facing down. An
acoustic signal is emitted and the border around the battery
symbol pulsates.
When the vacuum controller is in the holder, the vacuum
controller's rechargeable batteries are automatically
recharged. This takes place whether the vacuum con-
troller is switched on or off. Ensure that the vacuum con-
troller is positioned properly in the charging cradle.
Check that the vacuum controller and the vacuum sys-
tem are paired every time before using the vacuum con-
troller. To do this, use the paging function (see "CALL-
ING THE VACUUM SYSTEM").
Operation
DE
EN
FR
ES
IT
57
loading

Este manual también es adecuado para:

Laboport sc840g