Idiomas disponibles
Idiomas disponibles
Original
User Manual
Technical data
4
The VarioTwin type sump consists of a welded steel sump with plastic (PP) legs. The sump is available as
either galvanised or painted.
A grid (optional) is available as a standing surface.
Dimensions and load capacity
4.1
Model
W (mm)
TW 62
785
TW 201
841
TW 202
1236
TW 204
1236
TW 203-L
2005
TW 204-L
2470
TW 208-L
2455
Operation
5
Safety instructions
5.1
Note safety regulations!
The safety instructions in section 2 "Safety instructions" must be observed.
Loading the sump
5.2
Load drums into or onto the VarioTwin type sump using suitable means.
Check the drums are stable and cannot fall over or fall off.
If more than one drum is placed into the sump ensure that this displacement is taken into consideration
when calculating the sump fluid collection volume. For the largest containers in the sump, their capacity
must be taken into consideration up to the permitted fill level for the sump. For other drums, their capacity
must be subtracted up to the permitted fill level of the sump. The fluid collection volume thus determined
must be able to hold the contents of the largest container and at least 10% of the total stored drum capaci-
ty.
With containers which are used for dispensing, (e.g. horizontal drums with a tap), the handling area has to
be secured by the sump. Dispensing containers (eg cans) must not extend over the edge of the sump,
217882_BA_VarioTwin_001_INT
D (mm)
H (mm)
635
283
816
483
815
360
1210
295
815
360
816
253
1210
258
WARNING
Page 13 of 28
Max. load (kg/m²)
Sump capacity (l)
850
60
850
200
850
200
850
200
850
335
850
220
850
340
25.06.13
