Wiring Connection - JVC KW-DB93BT Manual De Instrucciones

INSTALLATION/CONNECTION

Wiring connection

Antenna input terminal (for FM/AM)
DAB antenna jack
(SMB connector)
Connecting the ISO connectors on some
VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
Battery wire
A4 (Yellow)
(Yellow)
Default wiring
If your car does not have an ISO terminal
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to
professionals for your safety. Consult your car
audio dealer.
34
ENGLISH
Yellow (Battery wire)
Red (Ignition wire)
Ignition wire
(Red)
Unit
Red (A7)
Yellow (A4)
ISO connectors
Rear/Front/Subwoofer output
For 3-way crossover: Tweeter/
Mid Range/Woofer output
Microphone input jack ( 13)
Fuse (10 A)
Light blue/yellow
To the steering wheel remote control adapter
(Steering remote
control wire)
Pin
A4 Yellow
A5 Blue/White
A6 Orange/white
A7 Red
A8 Black
B1 Purple ]
B2 Purple/black [
B3 Gray ]
B4 Gray/black [
B5 White ]
B6 White/black [
B7 Green ]
B8 Green/black [
* You can also connect a subwoofer speaker directly without an external
subwoofer amplifier. For setting,
When connecting to an external
amplifier, connect its ground wire to the
car's chassis to avoid damaging the unit.
Color and function
: Battery
: Power control (12 V 350 mA)
: Car light control switch
: Ignition (ACC)
: Earth (ground) connection
: Rear speaker (right)
For 3-way crossover: Tweeter (right)
: Front speaker (right)
For 3-way crossover: Mid range speaker (right)
: Front speaker (left)
For 3-way crossover: Mid range speaker (left)
: Rear speaker (left) *
For 3-way crossover: Tweeter (left)
23.