Wiring Connection; Parts List For Installation - JVC KD-AV300 Manual De Instrucciones

Wiring connection

Audio output (Rear)
Video output *
Video Out
L
R
Rear Camera In
Rear view camera input
E
Change the FUSE location to
switch ACC and B+ pin location
on the ISO connector.
* Video is not output for the
video output terminal when
the source is [TUNER] or [Front
AUX].
Purple/White
REVERSE
GEAR
Fuse (15 A)
SIGNAL
Light Green
PARKING
BRAKE
Antenna cord
Antenna terminal
D
Blue To the power control terminal when using an
optional power amplifier, or to the antenna control
POWER ANT/
REMOTE OUT
terminal in the vehicle (150 mA max)
Red (Ignition wire)
ACC
Yellow (Battery wire)
B+
Black (Ground wire)
To the metallic body or chassis of the car
White ª / White/Black ·: To front speaker (left)
Gray ª / Gray/Black ·: To front speaker (right)
Green ª / Green/Black ·: To rear speaker (left)
Purple ª / Purple/Black ·: To rear speaker (right)

Parts list for installation

To reverse lamp (required when
using a rear view camera)
Connect to the vehicle's parking
brake detection switch harness.
Ignition switch
Car fuse box
Battery
17
A Faceplate/Faceplate
E Speaker cord
case
F Extraction keys
B Mounting sleeve
G Rubber cushion
C Trim plate
H Mounting bolt
— M5 × 12 mm
D Power cord
I Flat head screws
— M5 × 8 mm
ENGLISH