Please note - important:
Lack of water
A minimum water quantity of 10 litres per minute must be available to
guarantee a trouble-free operation of the Kränzle 1152 TS T.
If the metered quantity of water is too small, you have to
use a different water connection, guaranteeing the neces-
sary output.
Lack of water leads to an accelerated wear of the joints
(guarantee void).
Water supply
Please pay attention to the regulations of your waterworks company! In
accordance with DIN EN 61770, the machine may not be directly connected to
the public drinking water supply lines. A brief connection however is permissible
according to DVGW (German Association for Gas and Water Affairs) if a non-
return valve with tube ventilator (Kränzle order no. 41.016 4) is built into the
water supply. Once the water has passed through the non-return valve it
is no longer considered as drinking water.
Also indirect connection to the public drinking water supply lines is permissible
by way of free emission in accordance with EN 61 770; e.g. by using a reservoir
with a float valve.
Direct connection to a non-drinking water supply line is permissible.
Ersatzteile auf www.gluesing.net
Lack of water occurs more often than you
probably believe. The more powerful a
high-cleaner is the greater is the danger
that a lack of water occurs. If there is only
an insufficient amount of water available,
cavitation (water-gas mixture) arises inside the
pump, which is normally noticed too late or
even not at all. The pump will be destroyed!
Please check the available quantity of water by
filling a bucket with litre scale for one minute.
GB
39