Idiomas disponibles
Idiomas disponibles
5
Safety protection
The blender has a safety protection system. When
Blender run over 3 minutes at a time, it will stop
process automatically. If you have not finished
processing after 3 minutes, switch off the appliance
and let it cool down to room temperature. Never use
over 3 minutes consecutively.
When assembling the blender jar, make sure that the
appliance is powered off first.
Do not attempt to process very thick recipes such as
bread dough or mash potatoes.
6
Using your blender
Using the blender jar (Fig. 2)
To use a quick select program, turn the rotary knob
to select the program you need and press it to confirm
your selection.
To pause ongoing processing, press the rotary knob
to pause. You can press it again to resume.
To stop ongoing processing and return to selection
mode, press return button
To process ingredients briefly (such as garlic), press
and hold pulse button
.
Note
•
After three minutes, the blender will stop the
process automatically.
•
Do not blend dry ingredients (for example
pepper corn or star anise).
Using the spatula (Fig. 3)
When the blender is switched on, use the spatula to
enhance the smoothness and consistency of result.
When the blender is switched off, use the spatula to
remove the sticky ingredients on the jar.
Using the tumbler jar (Fig. 5)
Make your smoothies or shakes directly with the
tumbler. Remove the blade unit and attach the lid of
the tumbler. Then you can bring the tumbler out and
enjoy directly.
Note
•
Never overfill the tumbler jar above the
maximum level indication to avoid spillage.
•
Never fill the tumbler jar with carbonated drinks
to avoid damage of the tumbler.
.
Using the juicer (Fig. 6)
You can use the juicer to juice up fruits and vegetables
such as apples, watermelon, pear, grapes, and
pineapple.
To use the juicer, follow steps in Fig.6.
Clear juice (step 10 in Fig.6)
To get juice with little fiber, you can:
1
Press Clear juice button
Press the rotary knob to start processing.
2
Pulpy juice (step 10 in Fig.6)
To get juice with fiber, you can:
Press Pulpy juice button
1
2
Rotate the rotary knob to select a processing
program.
•
P1: for soft and juicy fruits to make pulpy
juice with fibers in it.
P2: for both juicy and non juicy fruits to
•
make juice from mixed fruits.
P3: for juicy and non juicy fruits and
•
vegetables to make juice with lots of fibers
from mixed fruits and vegetables.
Press the rotary knob to start processing.
3
Tips:
To pause ongoing processing, press the rotary knob.
You can press it again to resume.
To stop ongoing processing and return to selection
mode, press the return button
Caution
•
If you exceed the recommended max ingredient
level for Blend & Juice, the juicer funnel may
become blocked. When this occurs, switch off
the appliance, turn over to jar stand mode,
remove excess ingredient and restart the Blend &
Juice preset again.
•
Some ingredients may not have enough juice for
effective juicing (eg. Carrot, apples, vegetables).
It is recommended to add suitable amount of
water/ice for best result.
.
.
.
EN
9
