Petsafe PDT19-17711 Manual De Instrucciones página 9

Control Panel
6
B
The control panel includes basic controls and more advanced Down/Stay Session controls
you will use as you progress further into training.
A. Status light: Illuminates to provide Teach & Treat status:
• Solid green: The dispenser is on, and the batteries are good.
• Solid blue: The dispenser is in Down/Stay mode.
• Solid red (button press displays green for 1 sec.): Battery power is low; replace the batteries.
• Fast flashing red (with tone): The dispenser is jammed.
• Fast flashing yellow (with tone): The dispenser is empty.
B. Volume switch: Controls the volume of the tone when treats are dispensed.
Pairing button: Used to pair the remote with the dispenser if pairing is lost.
C.
D. Treat setting switch:
• Single: Dispenses one treat at a time.
• Multiple: Dispenses 3 treats in succession (depending on treat size).
• Cue: Beeps to alert you when to dispense treats. When this setting is selected, the
timer will beep but the treat will not be dispensed until you press the dispense
button on the remote.
E. Treat rate dial: Determines treat frequency (in seconds) when training the down/stay.
F. Fixed/Variable switch:
• Fixed: Dispenses treats/kibble at the exact frequency selected on the treat rate dial.
• Variable: Dispenses treats at an unpredictable interval averaging the frequency
selected on the treat rate dial.
A
D
C
Cue
F
E