Steinberg Systems SBS-PW-60/5N Manual De Instrucciones página 25

SBS-PF-60/10 | SBS-PF-30/5 | SBS-PF-150 / 20N:
- scale switch
PRINT - button not assigned / not applicable.
# - button used during the calibration process
MODE - By pressing this button for 5 seconds in weighing mode, the scale will enter
the user setting mode; by pressing it for less than 5 seconds, the scale enters the
counting mode.
* - button for weight cumulation in weighing/sampling mode in counting mode.
TARE - The tare function is the weight of the package itself. It is the difference
between the total weight of the goods with packaging and the weight of the goods
without packaging. The tare is used to remove the weight of an item that should
not be included in the overall weight measurement.
ZERO (also used as TARE; display indicator) The zero function should only be used
when there is nothing on the pan and the display does not show "0". The scale may
not read "0" due to dust, dirt or moisture on the weighing pan or when a heavy
object is dropped on the scale. The zeroing function essentially corrects the true
zero on the scale and informs it that there is nothing on the pan.
AC/Charging - indicator of connected power supply (battery charging).
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a