Idiomas disponibles
Idiomas disponibles
2. How to use
Cleaner description
2-1
1
4
7
5
10
The assembled cleaner will look like the drawing.
Operate cleaner only at voltage specified on data
plate on bottom of cleaner.
This cleaner is intended for household use only.
2-2
B
Turning cleaner on
and adjusting power
level
After assembling cleaner, plug cord into
electrical outlet. Turn cleaner ON by
stepping on the ON/OFF pedal (A).
The suction control can be increased
or decreased by sliding the control (B)
towards MIN or MAX.
To turn cleaner OFF, step on the pedal.
4
All manuals and user guides at all-guides.com
15
16
17
1
18
6
4
1
8
14
11
9
2-3
A
Cord rewind pedal
The cord rewind pedal (C) is opposite
the ON/OFF pedal.
Hold on to the plug while cord is
being rewound to prevent cord from
whipping.
4
6
0
1
C
1. Hand grip
2. Power nozzle ON/OFF switch
3. Extension wand release buttons
4. Extension wands
5. Round swivel brush
6. Wand storage clip/tool holder
7. Upholstery tool
8. Power nozzle release button
9. Power nozzle
10. Headlight
11. Rug/floor pedal
12. Carrying handle
13. Hose connector
14. Filter bag door
15. Tool lid: stores crevice tool. Pull up
on edge of lid in recessed area
16. Full bag indicator
17. Suction control slide switch
18. ON/OFF pedal
19
19. Cord rewind pedal: step on pedal
to rewind cord for storage. Hold
plug until cord is rewound.
20. Large wheels: provide easy towing
when cleaner is pulled over carpet,
area rugs and door sills
21. Crevice tool (stores inside tool door)
22. Final filter door
23. Power cord
24. Wand holder slot
Polarized plug
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This
plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
2-4
Power nozzle
Handle positions
The handle has two positions when used
with the power nozzle: upright and
operating.
To lower handle to operating position,
place your foot firmly on the power noz-
zle and pull handle back.
