Polaris
FREEDOM
Cordless Robotic Cleaner | Owner's Manual
®
™
Figure 21. Store Cleaner on the Charging Station
NOTE: We recommend to let the cleaner dry before
being positioned on the charging station.
6.3
Storage
Everyday Storage
Store the cleaner in a protected and dry place with
an ambient temperature between 50°F (10°C) and
70°F (21° C), out of reach of children, pets, other
foreign objects, etc.
• Never store or dry the cleaner in direct sunlight.
• DO NOT expose cleaner to fire, excessive
temperatures, ignition sources, or pool and spa
chemicals.
• DO NOT leave the cleaner in the water when not
in use.
Long-Term & Winter
Remove the cleaner from the pool and drain all
water to avoid freezing water damage (freeze
damage is not covered under warranty).
For long term storage, it is recommended to
store the cleaner at 80-100% of battery capacity
(indicated by solid GREEN battery LED).
You may either:
• Leave the cleaner and charging station
connected until next use.
• Disconnect and recharge the cleaner at the start
of season.
Store cleaner and charging station out of direct
sunlight, rain or inclement weather.
6.4
Replacing Wear Parts
6.4.1 Replacing Brushes
The cleaner is fitted with PVC brushes with a
"wear" indicator.
Figure 22. Worn Brush Indicator
To maintain cleaner performance at its best you
need to replace the brushes as soon as one of the
wear indicators is reached (even if the blade wear
is not even). It is recommended that you replace
the brushes when the rubber is worn down to
the top of the wear indicator (or every two years,
whichever comes first).
To replace a worn brush:
1.
Lift the cleaner to a vertical position so that the
handle is up.
1
Figure 23. Cleaner in Upright Position
ENGLISH
Raised groove
becomes partially
flattened,
indicating
excessive wear
Page 15