Idiomas disponibles
Idiomas disponibles
ENGLISH
Section 4. Installing iAquaLink
The iAquaLink app is available for download from
the App Store or Google Play.
With iAquaLink Control, you can connect to your
robotic cleaner from anywhere, anytime to access
many functions and troubleshooting advice.
App features are dependent on model.
Before you begin installation, make sure you
have the following:
• Robotic cleaner is on charging station
• Charging station is connected and plugged
into a GFCI outlet
• Smart device (phone) with Wi-Fi and
Bluetooth enabled
• Wi-Fi router with sufficient signal strength
at the charging station
IMPORTANT
Have your Wi-Fi network password available
4.1
Download the App
Install or update the iAquaLink app from the
App Store or Google Play.
Once the download is complete, select the
iAquaLink icon on your smart device to open
the app.
4.2
Sign Up and Log In
Click Sign Up to create a new user account. Or, if
you previously set up an iAquaLink account, click
Log In to access your systems.
Complete all required fields in the Account Setup
page and agree to the Terms and Conditions.
WARNING
Do not enter pool while the robotic cleaner is in water.
Page 12
Polaris
4.3
Configure the System
®
1.
On the My Systems page, click + in the upper
right-hand corner to add a system.
2.
Choose "Robotic Cleaner" from the list and
choose your model type.
3.
Follow on screen prompts to pair your cleaner.
4.
Slide the slider right and HOLD for ten
seconds to put the cleaner in Pairing Mode.
Wi-Fi LED Indicates Connection Status
BLINKING - pairing
SOLID - connected to internet
Figure 16. Slide and Hold Right to Pair
5.
Follow on-screen prompts to add your cleaner
and connect to your home router.
NOTE: If you have problems connecting, the Wi-Fi
signal may not be strong enough next to
the pool. Try placing the charging station in
another location closer to your home router
(see iAquaLink Troubleshooting section.)
FREEDOM
Cordless Robotic Cleaner | Owner's Manual
®
™
