Idiomas disponibles
Idiomas disponibles
English
13. When the pressure cooker is moving in a working state should be especially
careful, flat end with, not allowed to push, bump and throwing.
14. When using a pressure cooker, do not focus the safe window on the user or person.
release device is blocked before use, or it should be cleaned in time.
15. Absolutely forbid to cover anything on the pressure regulating valve of the pressure
cooker.
16. There is pressure in the pot, shall not be forced to open the lid, the lid is not in place,
not heating cooking.
17. When the pressure cooker is working with a pressure vessel, check whether the
release device is blocked before use, or it should be cleaned in time.
18. Do not cook the pressure cooker in a microwave oven or an oven.
19. When the pressure cooker fails, please go to the designated or authorized repair
station to repair it.
20. Please use the genuine accessories.
III. Six-level safety device
1. Pressure Regulator Valve:It regulates the operating pressure level to maintain the
desired pressure level and temperature. The over pressure is released off by a spring
system.
2. Float safety valve:When the lid is correctly closed, the pressure of the pot can press
up, and the valve stem rises and the lid is locked.
3. If the lid is incorrectly or incompletely closed, the pressure don't rise, the float safety
valve stem can't rise, and always in a state of discouragement. So should stop heating,
recorrect the lid.
4. Float safety valve can automatically detect the pressure in the pot, when the pressure
in the pot is lower than the safety opening pressure, the valve stem will fall, allowing
the cooker to be opened.
5. Float safety valve: when the pressure regulator valve can not work properly, and
pressure is too high, the float safety valve is working to exhaust excess steam, so that
the pressure will not continue to rise.
6. Safety vent: the edge of the lid is provided with a safety went, when the pressure
regulator valve and the safety valve can't work properly. So the pressure is too high, the
gasket is extruded from the window, so that the pressure is quickly released.
- 5 -
