Fiorenzato F4 EVO Manual De Instalación, Uso Y Mantenimiento página 84

EN
Anomaly
The motor stops
during grinding.
During continuous
grinding the motor
stops.
ATTENTION! If the anomaly persists even after carrying out the suggested
corrective actions, or if functional anomalies occur that are not listed in
the table, contact your local dealer who will decide whether to request the
assistance service of Fiorenzato M.C. S.r.l. or to entrust the repair or overhaul
of the appliance to a specialist technician.
40 / 44
Cause
Motor protection ther-
mal cut-out intervention
due to blocking of the
grinding system in the
presence of objects or
foreign bodies between
the grinders.
The time limit set for
a single continuous
grinding cycle has been
reached.
Solution
• Turn off the appliance and wait
for it to cool completely.
• Disconnect the appliance from
the power supply.
• Close the shutter and remove
the supply hopper.
• Clean the grinding chamber
and remove any foreign bodies.
• Reassemble the appliance and
start a grinding cycle.
• Normally start the new desired
dispensing (single, double or
continuous).
• If the coffee grinder-doser does
not start immediately, wait 60
seconds to allow the motor to
cool as the appliance is set to
be able to operate continuously
for 50 seconds before imposing
a forced stop of the motor for 60
seconds.
Fiorenzato | Series F4 EVO_00 Ed. 06/2022
F4 EVO