EN
•
After cleaning, reassemble the hopper (Item 1) on
the grinding chamber (Item 2) and lock it with the
relative fixing screw (Item 3).
•
Close the hopper with the relative lid (Item 4).
•
Position the coffee drip tray (Item 5) at the base of
the coffee grinder-doser.
The coffee grinder-doser is ready to be used again
after being electrically powered and filled with coffee
beans.
6.1.2
Supply cable status check
AT EACH END OF SHIFT: check the power cable.
•
With the cable disconnected from the power sock-
et, check visually and by touch that the protective
sheath is intact, that the wires are not exposed and
that the plug is not damaged.
ATTENTION! If damage is found to the
power supply cable, replace it with one of
the same characteristics.
36 / 44
4
1
3
2
Fiorenzato | Series F4 EVO_00 Ed. 06/2022
F4 EVO
5