Idiomas disponibles
Idiomas disponibles
11 - TECHNICAL CHARACTERISTICS
Free-cooling plenum (Height = 550 mm):
This accessory should not be installed in corrosive environments (saline environments) or explosive environments (ATEX area).
Composition: this is a mixing box made up of two dampers (one on the fresh air side and the other on the room's return air side).
Two combined temperature and humidity sensors are also provided at the back of the vertical unit. (One outdoor sensor and one
internal room sensor).
Internal room sensor
The outdoor sensor should be installed in a well ventilated area that is not exposed to direct sunlight.
Connection: The plenum is positioned above the vertical unit. A diagram provided with the plenum explains the mounting system.
Do not forget to stick the adhesive seal provided to the edge of the frame of the plenum that will be in contact with the cabinet to
ensure its tightness.
®
MAGISTER
Grommet for control cable routing or for
master/slave management, as well as
room sensor cables.
Access hatch for junction box and
damper servomotors
Grommet for control cable routing
or for master/slave management,
as well as room sensor cables.
Junction box
2 dampers
Outdoor room sensor
EN-56
Servomotor
