Idiomas disponibles
Idiomas disponibles
USE
Plug in the appliance. A "beep" sound will be heard. The appliance is on standby mode. The power indicator light
is flashing.
On/standby: Press the on/standby button to turn on the appliance. Open the air outlet cover manually. The
power indicator light will illuminate still. The panel will show the current room humidity. Press the button again,
the appliance will enter into standby.
Humidity setting: press the humidity setting buttons to set your desired humidity level from 30% to 80%. Each
press will change the target humidity by 5% and after 80%, the figure will return to 30% for another circulation,
among which there is "CO" mode shown on the display. In the "CO" mode, the appliance will keep dehumidifying
no matter what the current room humidity is. The setting will flash several times in the panel, then the current
room humidity will be shown again. When the target humidity is reached, the target humidity indicator light
turns on.
Notes:
•
Humidity setting is only effective under the auto operation mode.
•
When the digital display is still, press the humidity setting button "+" or "-" once and you will see the target
humidity value. You can reset it by pressing the humidity setting buttons.
•
Long press the humidity setting button "+" for 3 seconds, the current room temperature will be flashed on
the digital display, and the temperature indicator light will illuminate. After several seconds, the digital
display will show back to the current room humidity, and the temperature indicator light will turn off.
•
When the humidity value is shown on the display, the humidity indicator light turns on.
Fan: Press the fan speed button to select low or high fan speed. The corresponding indicator light will be on.
In the dry-clothes mode, the fan speed cannot be selected. The appliance works in high fan speed.
MODE: Press the mode button to select the mode: manual mode, air circulation mode and dry-clothes mode.
1. Manual mode: In this mode, the manual mode indicator lights up. Both fan speed and humidity can be
adjusted under this mode. The appliance will automatically maintain the selected humidity.
2. Air circulation mode: In this mode, the appliance works with its inner fan and the humidity cannot be set.
The compressor does not work. The room humidity is shown on the panel.
3. Dry-clothes mode: In this mode, the appliance works in high fan speed for any room humidity and the
humidity cannot be changed. The room humidity is shown on the panel.
TIMER:
Auto-OFF setting
When the appliance is ON, press the timer button, the digital display will flash "00".
-
Press the timer setting button "+"/ "-" to select a desired auto-OFF time from 1 to 24 hours. The digital
-
- 8 -
