Idiomas disponibles
Idiomas disponibles
3. Rotate the pipe connector onto the one side of the pipe, and rotate the shoe connector onto the other side
of the pipe.
Pipe connector
Shoe connector
4. Connect the pipe to the cover box by the pipe connector. Remember to rotate and make the raised dot stuck
with the pipe connector.
5. Open the air outlet cover to the angle of 90°. Install the cover box vertically onto the air outlet. Pay
attention that the air outlet cover should cross through the corresponding gap of the cover box.
6. Insert the shoe connector into the shoes that need to be dried. When drying shoes, please select the dry-
clothes mode.
CLEANING AND MAINTENANCE
The appliance must be regularly cleaned to prolong its life and keep it function properly.
Warning: Before performing any cleaning, turn off the unit and unplug it to avoid electrical shocks. Do not use
hot water or chemical solvents for cleaning.
1.
Regularly, clean the water tank with cold or warm water and dry with a soft cloth to avoid any mildew.
2.
Clean the surface of the appliance using a moist cloth. Do not use detergents or abrasive sponges that can
cause damage to the plastic surface.
3.
Clean the filter as described in the following section.
4.
When the unit will not be used for a long time:
Pipe
Raised dot
Gap
- 10 -
