Emerio DH-127463 Manual De Instrucciones página 10

display will flash for several seconds, then the timer setting is confirmed. The timer indicator light will
illuminate. The digital display will turn back to the current room humidity.
The appliance will automatically turn off once the select time has passed.
-
To change the timer, press the timer button and press the timer setting button "+"/ "-" to change the value,
when it is set to 0 hour ("00"), the timer will be canceled and the timer indicator light will turn off.
NOTE:
1. This appliance is equipped with memory function in case of power-down, except for the timer function.
2. Important:
Fault code "E1" on the display: Temperature / humidity sensor is damaged; contact a professional for
inspection and maintenance.
DRAIN THE COLLECTED WATER
When the water tank is full, the water tank full indicator light will illuminate. The operation will stop
automatically and the buzzer will beep 20 times to alert the user that the water needs to be emptied from the
water tank.
Empty the water tank
1. Draw out the water tank gently by holding the concave part at the both sides.
2. Discard the collected water.
3. Install the water tank back by pushing it horizontally and gently. The handle of the water tank cover should
lie down.
NOTE:
1. How to detach the water tank cover: If you want to remove the water tank cover, you should detach the
handle (H) first. Align the slots and detach one joint of the handle from the slot first, then detach the other
joint to take off the handle. Pull the water tank cover upwards to take it off.
2. Before placing the water tank back, install back the water tank cover and handle first.
3. Do not remove the float from the water tank. The water full sensor will no longer be able to detect the water
level correctly without the float and water may leak from the water tank.
Continuous water drainage
Plug the provided plastic pipe to the continuous drainage outlet, and the condensed water will be continuously
drained out through this outlet instead of collection in the water tank. Make sure the pipe is installed at a
downhill way to let the water continuously flow out.
SHOE DRYING FUNCTION
1. Take out the spare parts for shoe drying. The pipe and connectors are stored in the water tank when
packaging.
2. Align and fasten the two parts of the cover box together.
- 9 -