Stihl MS 191 T Manual De Instrucciones página 31

English / USA
4
5
3
When engine begins to fire:
: Move the choke lever (5) to j and
continue cranking – as soon as
engine runs, immediately blip the
throttle trigger (3) – the Master
Control lever (4) will move to the
"Run" position # and the engine will
settle down to idling speed.
.
As the chain brake is still engaged,
the engine must be returned to idle
speed immediately – or the engine
housing and chain brake might
otherwise be damaged.
30
:
Pull the hand guard back toward
the front handle:=
The chain brake is now disengaged
– your saw is ready for operation.
Always disengage chain brake
before accelerating engine. High
revs with the chain brake engaged
(chain locked) will quickly damage
the engine and chain drive (clutch,
chain brake).
:
Observe safety precautions.
:
Always check operation of chain
lubrication before starting work.
To shut down the engine:
: Move Master Control lever to $
At very low outside temperatures:
Allow engine to warm up
As soon as the engine runs:
:
Blip the throttle trigger to disengage
it from the starting throttle position.
The Master Control lever will move
to the normal run position # –
engine settles down to idling speed.
: Disengage the chain brake:
Pull hand guard back toward front
handle as shown in illustration.
:
Open throttle partly – warm up
engine for short period.
.
MS 191 T