Items Supplied; Proper Use; Technical Data; Before Starting The Equipment - EINHELL GE-DP 18/25 Li Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 89

2.2 Items supplied

Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Cordless dirty water pump with battery box
Fastening hook
Intake cage
Original operating instructions
Safety instructions

3. Proper use

The equipment you have purchased is designed
to pump water with a maximum temperature of
35 °C. This equipment must never be used for
other liquids, especially not for engine fuels,
cleaning agents and other chemically-based
products!
The equipment can be used wherever you want to
move water, e.g. in the house, in the garden, and
for many other applications. It must not be used to
operate swimming pools!
If you want to use the equipment in bodies of wa-
ter with a natural, muddy bottom, place the equip-
ment in a slightly elevated position, e.g. on bricks.
Anl_GE_DP_18_25_Li_SPK13.indb 17
Anl_GE_DP_18_25_Li_SPK13.indb 17
GB
The equipment is not designed for continuous
operation, e.g. as a circulating pump in a pond. In
this case the equipment's anticipated life will be
greatly shortened because the equipment was
not designed for continuous loading.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The water may be contaminated by escaping lub-
ricating oil/lubricant.

4. Technical data

Voltage ....................................................18 V d.c.
Max. pumping rate .................................7,500 l/h
Delivery head maximum ............................... 5 m
Max. delivery pressure ............0.05 MPa (0.5 bar)
Max. immersion depth ................................... 4 m
Water temperature maximum ...................... 35°C
Hose connection
......................approx. 42 mm (1 1/4") male thread
Max. size of foreign bodies ....................Ø 25 mm
Suction height ...................... min. approx. 35 mm
Minimum water level when starting up ..... 40 mm
Type of protection of pump ...........................IPX8
Type of protection of battery box ..................IPX4

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
5.1 Installation
The equipment can be installed either:
Stationary with a rigid pipe line
or
Stationary with a flexible hose line
- 17 -
27.06.2022 10:04:06
27.06.2022 10:04:06
Tabla de contenido
loading

Este manual también es adecuado para:

41.815.80

Tabla de contenido