User Interface; Troubleshooting - Husqvarna 225i Manual Del Usuario

User interface

LED screen Possible faults
The warning in- Chain brake is
dicator flashes. engaged.
Temperature
deviation.
Overload. The
saw chain can
not move.
The power trig-
ger and the
start/stop but-
ton are pushed
at the same
time.
Green activate Low battery
LED flashing. voltage.
The warning in- Service.
dicator is on.
Battery
LED display
Green LED flashes.
Error LED flashes.
Error LED comes on.
34

Troubleshooting

Possible solution
Disengage the chain brake.
Let the product to cool down.
Release the saw chain.
Release the power trigger to activate the product.
Charge the battery.
Speak to your servicing dealer.
Possible faults
Low battery voltage.
Temperature deviation.
Too much voltage.
Too much cell difference (1V).
Possible solution
Charge the battery.
Use the battery in temperatures
between -10°C (14°F) and 40°C
(104°F).
Make sure that the mains voltage
aligns with the voltage of the product.
Refer to the rating plate on the prod-
uct.
Remove the battery from the battery
charger.
Speak to your servicing dealer.
1860 - 001 - 23.09.2022