Setting The Temperature And Cooking Time; Automatic Programmes; Using The Appliance; Interrupt Use - Clatronic FR 3782 H Manual De Instrucciones

Setting the Temperature and Cooking Time

There are 2 buttons and
• Use the or button next to the symbol to set the
temperature (80 – 200 °C).
• Use the or button next to the symbol
cooking time (1 – 60 minutes).
• The display alternates between the temperature and the
cooking time.

Automatic Programmes

Pre-set
Mode
temperature in °C
Pizza (warm up)
French fries
Steak
Shrimps
Fish
Chicken leg
Vegetables
Ribs
• These shall be considered as guide values. Depending
on the size and weight, the time and temperature may be
longer and higher or shorter and lower.
• Also observe the information on the food packaging.
• You can also adjust the pre-set temperature and cooking
time of the automatic programmes.

Using the Appliance

1. Make sure that the appliance is disconnected from the
mains.
2. Pull the frying container out of the appliance by the
handle.
3. If necessary, place the sieve insert with the silicone
nubs in the appliance. Push the sieve insert all the way
down.
4. Push the frying container back into the appliance. It
must lock into place.
WARNING:
• Always switch off the appliance and disconnect the mains plug
from the socket before cleaning. Wait until the appliance has
cooled down.
FR3782H_IM
on the appliance.
to set the
Pre-set time
in minutes
200 8
200 22
180 18
180 12
180 14
180 21
180 15
180 20

Cleaning

5. Plug the appliance into a properly installed earthed
socket. A beep sounds and all symbols light up briefly.
The button lights up.
6. Press the button to exit standby mode. The appliance
is pre-set to 200 °C and 18 minutes.
7. We recommend preheating the appliance for about
4 minutes. To do this, use the
the required temperature and cooking time to 4 minutes.
8. Press the button to start the cooking process.
9. After the time has elapsed, 3 signals sound and the
appliance switches to standby mode.
10. Pull the frying container out of the appliance by the
handle.
11. Place the frying container on a heat-resistant surface.
12. Fill the frying container with the desired food.
13. Push the frying container back into the appliance.
14. Press the button again to exit standby mode.
15. Select an automatic programme or set the cooking time
and temperature individually using the
16. Press the button to start the cooking process.
17. If necessary, shake the food halfway through the
cooking time. To do this, pull out the frying container by
the handle.
18. Push the frying container back into the appliance.

Interrupt Use

• Press the button to pause the operation. If you want
to resume operation, press the
60 seconds.
• In addition, operation is interrupted when you pull out
the frying container. Put the frying container back in to
resume operation.
• The appliance will start from the spot it has been paused.
If, however, you pull out the power plug, your current
settings will be lost. When inserting the power plug
and pressing the button the appliance will show the
pre-adjustment again.

End of Use

1. After the cooking time has elapsed, the appliance auto-
matically switches to standby mode. 3 signals sound.
2. Pull out the frying container by the handle.
3. Put the food in a heat-resistant bowl.
4. Push the frying container back into the appliance.
or buttons to set
or buttons.
button again within
11
06.05.22