Use Tv Spigot For Truss Mounting - Cameo S4 IP Manual De Usuario

USE TV SPIGOT FOR TRUSS MOUNTING

HAZARD: Overhead mounting requires extensive experience, including the
calculation of the limit values for load, the installation materials and regular safety
inspection of all installation materials and spotlights. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a
qualified professional.
secured may come loose and fall down. This can cause serious injury or death.
The 28 mm TV spigot previously mounted on the U-bracket can also be used for
truss mounting. Use a suitable fastener and make sure it is firmly attached. To
adjust the dispersion direction in the vertical plane, slightly loosen the clamps mounted on the
U-bracket, set the desired dispersion direction and tighten the clamps again. Secure the spotlight
to the side handle recesses using a suitable safety cable (Fig. A).
34
There is a risk that devices that are incorrectly mounted and
A
- Similar to image -
A