Installation And Truss Mountng - Cameo ZENIT W600i Manual Del Usuario

INSTALLATION AND TRUSS MOUNTNG

Thanks to its integrated plastic feet, the lamp can be positioned in a suitable location on a level
surface. Installation on a truss is carried out with the help of two Omega brackets, which are
mounted on the underside of the device base with a suitable tool (A). 2 x Omega brackets, 4 x M8
socket screws and washers are included. Suitable truss clamps are optionally available. Ensure
firm connections and secure the spotlight to the intended position (B) with a suitable safety cable
if required.
HAZARD: Overhead mounting requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
24
B
A
A