Cameo S4 IP Manual De Usuario página 27

Settings
Wireless = W-DMX settings WDMX State On
Settings
Display = Display
Reverse
Rotate display
Display = Display lighting
Off Timer
Signal Fail = Operational
status with DMX
signal fault
Off
Operating Receive
Mode
Transmit
Transmitting G3
Mode
G4s
Link Link
Unlink
Receive No
Reset
Yes
Off No display rotation
On Display is rotated by 180° (e.g. for overhead
installation)
Always On On permanently
Off after 20s Deactivates after approximately 20 seconds of
inactivity
Hold last command is retained
Blackout Activates blackout
User colour activates User Colour 8
8
Fade Out 10s fade to blackout
10s
Full On All LEDs at maximum brightness
Activate W-DMX
W-DMX deactivated
W-DMX mode Recipient
W-DMX mode Transmitters
G3 transmission standard
G4s transmission standard
Pair with W-DMX devices.
W-DMX must be enabled on all
devices, and the pairing with a
transmitter be retained (Receive
Reset).
Unpair all devices
Cancel operation
Terminate the connection to all
paired W-DMX transmitters and
put them on pairing standby
27