System Function; Performing Calls; How To Call From The External Unit; How To Answer A Call From An Internal Unit - Comelit HFX-700W Manual Tecnico

5. System function

f Press the desired key once to activate the function associated with it.
Wait for approximately 1 sec. before pressing the same key again. Pressing the same key several times in quick succession will
cancel the command.

5.1 PERFORMING CALLS

5.1.1 How to call from the external unit

f To send the call from an external unit, press the button.
» On the external unit the LED will flash and the confirmation
tone will sound. The video image from the external unit will
appear automatically on internal door entry monitor/s.
5.1.3 How to transmit a call to the other internal
units
This function can be used to transmit a call to the other internal
units set to the same user code or set to another user code
(for programming see "4.2.3.2 How to program the INTERCOM
function" on page 22).
f Press the programmed button to send the call.
» If the system is busy: the
set to
INT
30
1
LED will flash 4 times
the system is busy the system is busy
1

5.1.2 How to answer a call from an internal unit

» On receipt of a call from the external unit you will hear the call
ringtone
f Press to enter into communication with the caller.
f Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
2
5.1.4 How to answer a call from an internal unit
» On receipt of a call from the internal unit you will hear the call
ringtone. With "Silent mode (Privacy) on" the internal unit will ring
in any case.
f Press to enter into communication with the caller.
f Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
2