Technical Data; Angle Grinder; Noise/Vibration Information; Restart Protection - Bosch Professional GWS 18V-10 P Manual Original

Technical Data

Angle Grinder

Article number
Rated voltage
A)
Rated no-load speed
Max. grinding disc diameter/rubber sanding pad diameter
Grinding spindle thread
Max. thread length of grinding spindle
Kickback stop

Restart protection

Run-out brake
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation
ing storage
Compatible rechargeable batteries
Recommended rechargeable batteries
Recommended chargers
A) Rated no-load speed for the selection of appropriate grinding tools in accordance with EN 60745. The actual speed is lower for safety reas-
ons.
B) Depends on rechargeable battery, protective guard, and auxiliary handle in use
C) Limited performance at temperatures < 0 °C

Noise/Vibration Information

Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power tool are: 80
dB(A); sound power level 91 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Surface grinding (roughing):
2 2
a = 6.5 m/s , K = 1.5 m/s ,
h
Disc sanding:
2 2
a = 3.5 m/s , K = 1.5 m/s .
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
Bosch Power Tools
V=
-1
min
mm
mm
B)
kg
°C
C)
and dur- °C
GBA 18V... ≥ 4.0Ah
ProCORE18V... ≥ 4.0Ah
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Kickback control
If there is a sudden kickback in the power tool,
e.g. jamming in a separating cut, the power
supply to the motor will be interrupted elec-
tronically.
To restart the tool, set the On/Off switch (6) to the "off" po-
sition and then switch the power tool on again.
Restart protection
The restart protection feature prevents the power tool from
uncontrolled starting after the power supply to it has been
interrupted.
To restart the tool, set the on/off switch (6) to the off posi-
tion and then switch the power tool on again.
English | 11
GWS 18V-10 P GWS 18V-10 P
3 601 JJ4 18. 3 601 JJ4 1..
3 601 JJ4 1K.
18
9000
100
M 10
22
●
●
●
2.3–3.2
0 to +35
–20 to +50 –20 to +50
GBA 18V... GBA 18V...
ProCORE18V... ProCORE18V...
GBA 18V... ≥ 4.0Ah
ProCORE18V... ≥ 4.0Ah
GAL 18...
GAX 18...
GAL 36...
1 609 92A 7ZT | (26.09.2022)
18
9000
125
M 14
22
●
●
●
2.5–3.3
0 to +35
GAL 18...
GAX 18...
GAL 36...