Chicco MYSA Manual De Instrucciones página 14

• Do not use this product if any part
is broken, torn or missing.
• With the car seat installed on the
stroller, this is not a replacement for
a crib or bed, if the child needs to
sleep he or she should be placed in
a carrycot, crib or bed.
• Before assembling, ensure that the
product and its components have
not been damaged during trans-
portation. In this case, do not use
and keep out of reach of children.
• During adjustment operations, en-
sure that the moving parts of the
stroller do not come into contact
with your child.
• Make sure that the person using
the stroller knows how to operate
it in the safest way.
• This product must only be used by
an adult.
• The product must only be assem-
bled by an adult.
• To avoid all strangulation hazards,
never give children objects with
cords or strings attached, or leave
them close to such objects.
• Never use the stroller on staircases
or escalators: you could suddenly
lose control of it.
• Always pay attention when going
up and down steps or pavements.
• If the stroller is left exposed to di-
rect sunlight for an extended pe-
riod of time, allow it to cool down
before placing your child inside.
Prolonged exposure to direct sun-
light may cause the colour of the
materials and fabric to fade.
• Prevent the stroller from coming
into contact with salt water. It may
cause rusting.
• Do not use the stroller on the
beach.
• When not in use, the stroller should
be kept out of reach of children.
TIPS FOR CLEANING AND MAINTENANCE
This product requires periodical maintenance. Cleaning and main-
tenance should only be carried out by an adult.
CLEANING
The lining can be removed (please refer to the section "Fitting/re-
moving the seat lining"). Please refer to the care labels for instruc-
tions on how to clean the fabric parts. The washing symbols and
relative meanings are indicated below:
Hand wash
Do not bleach
30° C
Do not tumble dry
Do not iron
Do not dry clean
Routinely wipe clean plastic parts with a soft damp cloth. Never use
solvents or abrasive products. To prevent the formation of rust, always
dry metal parts if they have come into contact with water.
MAINTENANCE
Regularly check the condition of the wheels and clean off all dust
and sand. To avoid friction that may compromise the correct func-
tioning of the stroller, make sure that all plastic parts are clean of
dust, dirt and sand. Keep the stroller in a dry place. If necessary, lu-
bricate the moving parts with dry silicone lubricant.
LIST OF COMPONENTS
Check that none of the components of this model are missing be-
fore assembling the product. If any part is missing, contact Chicco
Customer Service. No tools are needed to assemble this product.
The following pieces are needed for product assembly:
• Frame
• Seat with lining
• Canopy
• Bumper bar
• Comfort kit (shoulder straps and crotch straps)
• Storage basket
• Rain cover
• 2 Rear wheels
• 2 front wheels
Important Note: the pictures and instructions contained in this
booklet refer to a specific version of the stroller.
STROLLER FIRST ASSEMBLY
WARNING: When unfolding and folding this product, make sure
that your child or other children are at a safe distance. Make sure
that during these operations the moving parts of the stroller do not
come into contact with your child.
1. To open the stroller take hold of the handle and front tube and
rotate until a click confirms that the stroller has opened complete-
ly (Fig. 1).
2. Insert the front wheel in the dedicated hole on the frame until
you hear the locking click (Fig. 2). Repeat the same operation for
the other front wheel.
3. To assemble the rear wheels insert the wheel pin in the rear leg
tube (Fig. 3). Repeat the same operation for the other wheel.
WARNING: Before using the stroller, make sure that the wheels are
firmly attached to the structure by gently pulling them outwards.
14