Use And Maintenance; Using The "My" Favourite Position; Programming Or Modifying The "My; Deleting The "My - SOMFY Oximo io Manual

EN

3. Use and maintenance

This drive is maintenance-free.
If no io-homecontrol
home automation professional.

3.1. USING THE "MY" FAVOURITE POSITION

When the blind is stopped, briefly press the "my"
-
button to move the blind to the favourite position.
When the blind is moving, briefly press the "my"
-
button stops the blind.

3.2. PROGRAMMING OR MODIFYING THE "MY"

Move the blind to the new favourite position.
-
Press the "my" button until the blind moves briefly
-
(5 s).

3.3. DELETING THE "MY"

Move the blind to the favourite position.
-
Press the "my" button until the blind moves briefly
-
(5 s).

3.4. TIPS AND RECOMMENDATIONS FOR USE

3.4.1. Questions about the Oximo io?
Observations
The motor does not
work.
If the roller blind still does not work, contact a motorisation and home automation
professional.
3.4.2. Obstacle when operating the blind
• Obstacle when raising: the blind stops and
raising is disabled!
To authorise raising of the blind: give an order
→
to lower then raise the blind.
• Obstacle when lowering: the blind stops then is
raised.
if the obstacle is detected close to the lower end
limit, the blind stops and is not raised.
8
Copyright © 2006-2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved. Images are not contractually binding.
control point has been programmed: contact a motorisation and
®
The thermal contact (wait for the motor to cool down).
The remote control battery.
1)
[1]
[1]
1)
2)
1)
[1]
[1]
Check
[1]
[1]
[2]
[2]
2)
[2]
[2]
2)
[2]
[2]