Erasing The Memory Of The Motor; Use And Maintenance; Mode Selection: Roller Or Tilting Mode - SOMFY HOME MOTION Tilt & Lift 25 RTS Central Manual

2.4.5. Erasing the memory of the motor

To reset the motor, press and hold the PROG
button on the motor head until the motorised
product moves up and down 3 times.
All the settings are erased.

3. USE aNd MaINTENaNCE

This motor is maintenance-free

3.1. ModE SELECTIoN: RoLLER oR TILTINg ModE


The mode selection is only possible if step 2.3.4. has already been completed.
The Tilt & Lift 25 RTS Central is designed to work with 2 modes: Tilting mode or Roller
mode. This feature allows the Tilt & Lift 25 RTS to be set according to the type of blind
you are working with. The Tilt & Lift 25 RTS is set by default to work in Tilting mode.
1) Move the motorised product away from
the end limits.
2)Simultaneously press the Up and down
buttons until the motorised product moves
up and down.
3) Press and hold the my and down buttons
simultaneously until the motorised product
moves up and down to change from Roller
mode to Tilting mode.
To return to previous mode, repeat step 1.
10
1
2
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
x2
x3
3