Set Lcd Contrast; Set Category; Set Dialing Mode; Incoming Calls - Steren TEL-225 Manual De Instrucciones

SET LCD CONTRAST

Press the HOLD / SET key, then press the Advance or Go back key to enter the contrast setting
of the LCD display. Press the HOLD / SET key to enter and press the Advance or Go back key
to select the desired contrast. Then press the HOLD / SET key to confirm.

SET CATEGORY

Press the HOLD / SET key, then press the Advance or Go back key to enter the category
configuration. It shows on the screen "
now " " is displayed. Press the Advance or Go back key to select ON or OFF. If
it is activated, the entire incoming number will be shown on the LCD screen, it will not filter
the first digit.

SET DIALING MODE

With the handset hung, press the * key for a few seconds to enter and set the dialing mode.
The screen shows "
the key for a few seconds again to change the dialing mode. While dialing a number in pulse
dialing mode, you can press the * key to switch to tone dialing mode. For example, dial the
number 1234567, dial 123 for Pulse mode, then press the * key, then dial 4567, then the
number 4567 dial for the Tone mode.

INCOMING CALLS

Press the Advance or Go back keys to check incoming calls forward / backward. The LCD
shows " " if there are no calls or at the end of the list. The number displayed on
the LCD can be erase and dial.
" which means dial tone; "
7
". Press the HOLD / SET key to enter,
" means pulse dialing mode. Press