Product Usage; Care And Cleaning - KitchenAid 5KSMVSA Manual Del Propietário

Ocultar thumbs Ver también para 5KSMVSA:
Tabla de contenido
PRODUCT ASSEMBLY (CONTINUED)
5.
Insert the attachment Shaft Housing into the attachment hub, making certain the power
shaft fits into the square hub socket. If necessary, rotate the attachment back and forth.
The pin on the Attachment Housing fits into the notch of the hub rim when in the proper
position.
6.
Tighten the Stand Mixer attachment hub knob until the attachment is completely secured
to the Stand Mixer. Make sure that the hub knob is properly seated in the retention hole in
the attachment.

PRODUCT USAGE

USING THE FRESH PREP SLICER/SHREDDER ATTACHMENT
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in amputation or cuts.
NOTE: For best results, feed only one item at a time into the Feed Tube (ex. carrot).
Do not feed items into the Feed Tube by hand; always use the Food Pushers. If food remains
in the Fresh Prep Slicer/Shredder Attachment after running, turn the Stand Mixer to "0",
remove the remaining items, and place back into the Feed Tube to Shred or Slice again.
1.
Place a large bowl under the Fresh Prep Slicer/Shredder Attachment to catch food as it
comes out.
2.
Cut food into small strips or pieces sized to fit into the Feed Tube.
3.
Turn the Stand Mixer to Speed 4 and feed food into the Feed Tube using Food Pusher.
4.
Turn the Stand Mixer "0" (Off) and unplug.
5.
Push down on the Release Lever and pull out the Blade, in order to change to a new
Blade.

CARE AND CLEANING

CLEANING THE FRESH PREP SLICER/SHREDDER ATTACHMENT
IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
IMPORTANT: The housing of the Fresh Prep Slicer/Shredder Attachment must be hand
washed only using warm, soapy water. The Fresh Prep Slicer/Shredder Attachment Blades
and Accessories are dishwasher safe, top rack only.
1.
After using the Fresh Prep Slicer/ Shredder Attachment, remove all Blades and Accessory
items. Wash the Blades and Accessories in the dishwasher, top rack only.
2.
Clean the Housing of the Fresh Prep Slicer/Shredder Attachment by hand only. Wash with
a soft, damp cloth.Dry thoroughly with a soft dry cloth. Do not wash in the dishwasher.
NOTE: For best cleaning, rinse Blades immediately after use. If necessary, use a dish washing
brush.
WARNING
Rotating Blade Hazard
5
Tabla de contenido
loading

Este manual también es adecuado para:

5ksmemvsc

Tabla de contenido