Noise /Vibration Information; Intended Use - Würth EWS 10-125 COMPACT Traducción Del Manual De Instrucciones De Servicio Original

The noise level may exceed 80 dB(A) during work.
Risk of severe injuries and acoustic trauma.
Â
Wear ear protectors!
¾
Noise emission values
These values enable the estimating of the noise emissions of the power tool and comparison with various
power tools. Dependent on the conditions of use, state of the power tool or attachments, the actual loading
may be greater or smaller. When estimating also take into consideration work breaks and phases with lower
loading. Specify protective or organisational measures for the user based on the corresponding adjusted
estimation values.
Art.
a /K * m/s
2
h, SG h, SG
a /K * m/s
2
h, DS h, DS
L /K
dB (A)
pA pA
L /K
dB (A)
WA WA
Vibration total value (vector sum in three directions)
measured in accordance with EN 60745:
a , = Vibration emission value (surface grinding)
h SG
a , = Vibration emission value (grinding with grinding disc)
h DS
K = Uncertainty (vibration)
h, SG/DS
* The specified vibration emission values:
• Were measured using a standardised test method and can be used to compare one electric tool with
another.
• Can be used for a rough assessment of the exposure.
This device is only to be used as a grinder, sander, for work with wire brushes and for cut-off machining of
metal, concrete, stone and similar materials without the use of water. Use only original Würth accessories.
Any other use or use outside this scope is considered improper use.
The user is solely responsible for damage resulting from improper use.
22

Noise /vibration information

WARNING !
5707
5707 003 X
004 3
6.0/1.5 6.0/1.5
< 2.5/1,5 < 2.5/1,5
93.0/3 94.5/3
104.0/3 105.5/3

Intended use

5707 040 5707 005
X X
6.0/1.5 6.0/1.5
< 2.5/1,5 < 2.5/1,5
94.5/3 93.0/3
105.5/3 104.0/3
Typical A-rated sound pressure level:
L = Sound pressure level
pA
L = Sound power level
WA
K ,K = Uncertainty
pA WA
5707 006 5707 007
X X
6.0/1.5 6.8/1.5
< 2.5/1,5 3.0/1.5
93.0/3 93.0/3
104.0/3 104.0/3