Bosch Rexroth HD 2 Instrucciones De Montaje página 56

18/38 Assembly
5. Support the lift rotate
unit during the assembly.
6. Assemble the lifting
plate (A) and adjust the
lift rotate unit between
the section profi les (E).
Please note:
• The lifting plate (A) must
fi t centrally and parallel
between the section
profi les (E).
• If the lifting plate does
not fi t between the
section profi les, rotate
the lift rotate cylinder (X)
accordingly.
7. Tighten down the
fl ange nuts.
Bosch Rexroth AG, MIT: HD 2, 3 842 358 735/2019-10
ST 2/B
7
SW13
M = 25Nm
D
Fig. 6: Assembling the lifting plate and lift rotate unit
SW5
M = 7Nm
D
6
2
SW6
M = 25Nm
D
7
SW13
5
X
358 735-05