Filter Care - DeWalt DWV905M Traducido De Las Instrucciones Originales

EnGLIsH
DWV905H
This appliance can be used as industrial vacuum cleaner and
dust extractor for mobile operations to take up all types of dry,
non-combustible dusts up to dust Class H with limit values for
occupational exposure smaller than 0.1 mg/m².
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These heavy-duty vacuums are for professional use.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
DO nOT use the dust extractor for combustible dust.
DO nOT use the dust extractor in explosive atmospheres.
nOTE: This appliance is suited for the commercial use, e.g.
in hotels, schools, hospitals, factories, shops, offices, rental
companies, and on construction sites.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of injury, turn
appliance off and disconnect appliance from power
source before installing and removing accessories,
before adjusting or changing set-ups or when
making repairs. An accidental start-up can cause injury.
Before the first commissioning
• Open the canister latches
of the machine.
• Remove the accessories from the canister
packaging!
• DWV905H: Cover the text field of the dust class warning
label 23 with the supplied adhesive label in your
national language.

WARNING: The filters
vacuuming, except as described under Wet Pick Up
applications under Operation. When vacuuming fine
dust, you may also use an additional paper bag or fleece
bag to make emptying the canister easier.

WARNING: Dust collection bags must be used for dust
Class M. For Class H, Dust Collection Bag DWV9400 must
be used but can be combined with DWV9402 Fleece Bag.
1. If optional paper, plastic, or fleece bag
install as shown in Figure B. Refer to the accessory section
to select the correct filter.
nOTE: Be careful not to tear the bag. Place bag securely
onto inlet 10 to provide a tight seal for maximum dust
collection performance.
2. Place the vacuum head
closing the canister latches
26
4 and remove the Vacuum head
6 and the
9 must always be in place while
20 is to be used,
3 onto the canister and secure it by
4 .
3. Insert end of hose
counterclockwise to lock in place as shown in Figure C.
OPERATION
Dry Vacuum Operation (Fig. D)

WARNING: Always observe the safety instructions and
applicable regulations.

WARNING: To reduce the risk of injury, turn
appliance off and disconnect appliance from power
source before installing and removing accessories,
before adjusting or changing set-ups or when
making repairs. An accidental start-up can cause injury.
1. Plug the power cord into an appropriate outlet.
2. Set the hose diameter adjuster
connected hose.
3. Turn the on/off tool control switch
4. Set the variable suction dial
This feature allows the user to control the vacuum's power,
suction and noise.
nOTE: This setting also controls the level of suction. This
is very useful in applications where the vacuum creates
unacceptable levels of drag to the work piece.
5. Follow the direction under connecting to Power Tools to
connect to the power tool to be used.

Filter Care

Class H filters must not be cleaned manually. If the filter is
clogged, it must be disposed of.
The filters included with this vacuum are long life filters. To be
effective in minimizing dust recirculation, the filters MUST be
installed correctly and in good condition.

WARNING: Appropriate personal protective equipment
like dust mask and gloves should be used while handling
3
the filters.

WARNING: Dispose of the used filter in accordance with
the legal regulations.
Hose Diameter Adjustment (Fig. D)
Adjust the hose diameter control
tube) inside diameter size (32mm or 20mm) or accessory
diameter referring to the largest section. The chosen diameter
of the adjustment control must be equal or bigger as the largest
diameter of the used hose/tube/ accessories. The hose supplied
is 32 mm inside diameter. An acoustic alarm will sound if the
flow rate falls below 20 m/s. The system has a time delay to
reduce unintended alarms.
nOTE: Set the hose diameter regulator only to the yellow
marked diameter ranges of the connected suction hose.
If the alarm sounds when there is no apparent blockage:
1. Ensure that the adjustment control is set to the
correct diameter.
2. If the flow rate adjustment is set below the maximum,
increase this level until sufficient flow through the hose
causes the alarm to stop.
7 into twist-lock hose inlet and rotate
16 to the diameter of the
15 to the ON position
14 to the desired position.
16 to the correct hose (or
).