Warranty; Safety Precautions; Precautions; Results Of The Tests Made By Law - CAMPAGNOLA P8 Manual De Uso Y Mantenimiento

1 - INTRODUCTION

1.5 Warranty

• CAMPAGNOLA S.r.l. grants a 1 or 2 years'warranty, according to the kind of product, starting from the purchase date
indicated in the invoice or in any other document with legal value.
• The warranty is to be considered valid only if the installation and use of the products have been carried out according
to the indications in the use and maintenance manual or to written instructions by the authorized service points personnel. • Parts with manufacturing defects will be repaired or replaced free of charge.
• Labour and transport costs are excluded from the warranty.
• All the parts subject to wear (belts, filters, blades, seals, etc.) are excluded from the warranty.
• Costs of interventions performed by the manufacturer's personnel (inspections, disassembling and assembling opera-
tions), caused by a wrong use of the product, are not included in the warranty.
• The manufacturer's technical service personnel will indicate which replacements and/or repairs will be carried out under
warranty, and their decision is final.
• The company shall not be held responsible for any injury or damage caused to people, animals or things, due to improper
use or maintenance of the products. The warranty is limited to the manufacturing defects.
• The warranty gets void in case of tampering and/or even small changes carried out without the manufacturer's technical
staff permission and in case of use of non-original spare parts.
• In any case the replacement of the product is not included in the warranty.
WARNING!
For warranty claims, according to the above mentioned points, it is necessary to enclose the properly filled-in warranty
card and the corresponding purchase proof with date of purchase (invoice or any other document with legal value).
2

- SAFETY PRECAUTIONS

2.1 Precautions

WARNING!
CAMPAGNOLA S.r.l. declines all responsibilities if the precautions below are not taken.

2.1.1 Results of the tests made by law

WARNING!
Risks due to the operator's contact with the noise and vibrations of the machine or tool.
1) NOISE LEVEL
Continuous A-weighted sound pressure level at the operator's ear (LpA), and sound power level of the tool (LwA),
both calculated according to the UNI EN ISO 22868 rules:
Measured sound power level: LwA = 103 dBA
Guaranteed sound power level: LwA = 104 dBA
2) VIBRATIONS LEVEL
Average weighted hand-transmitted vibration value in frequency, the user is exposed to, measured in compliance
with UNI EN ISO 22867:
• Front handle test while idling:
• Front handle test while working:
• Rear handle test while idling:
• Rear handle test while working:
22 - 120
LpA = 96 dBA
eq
a = 0.17 m/s
2
heq
a = 3.72 m/s
2
heq
a = 0.37 m/s
2
heq
a = 2.65 m/s
2
heq