EN
Cleaning, Care & Maintenance
Defrost appliance at least every 3 months, more often if required.
•
•
Switch off and disconnect from the power supply before cleaning.
•
Clean the interior of the appliance as often as possible.
•
Do not use abrasive cleaning agents. These can leave harmful residues.
•
Clean the door seal with warm soapy water.
•
Always wipe dry after cleaning.
•
Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
•
Take care when cleaning the rear of the appliance. Sharp edges can cut.
Condensation will form in refrigeration with frequent opening of the doors and on hot humid
days, please ensure condensation is allowed to drain properly or is wiped dry.
Stainless Steel Care
To maintain the stainless steel exterior of your Polar item, please consider the following information:
Never:
•
Use abrasive Scourers or scrubbing pads, etc.
•
Use Chlorinated or acidic detergents
•
Allow anything e.g. food, dirt, cleaning chemicals to remain on the surface for longer than necessary,
clean them off right away.
•
Allow the surface to remain wet.
Do:
•
Clean often.
•
Use soft Cloths or plastic Scourers.
•
Rub with the grain of the metal, rather than across it.
•
Use detergents and polish designed for cleaning Stainless Steel.
•
Ensure that the cleaning products are washed off fully and that the steel is left dry.
Routine Maintenance - Cleaning the Condenser
•
The condenser is part of the refrigeration
system. The condenser requires monthly
cleaning.
•
Always disconnect power supply before carrying
out Routine Maintenance.
•
Failure to clean the condenser will reduce the
performance and life of your Polar unit and may
invalidate your warranty.
•
The condenser is located above the refrigeration
cabinet. These models have a removable filter
which can be cleaned with a vacuum cleaner.
8
G592-G595_U632-U635_CC663_CD616_CW193-CW198_ML_A5_v16_20221021.indb 8
G592-G595_U632-U635_CC663_CD616_CW193-CW198_ML_A5_v16_20221021.indb 8
2022/10/21 15:23
2022/10/21 15:23