Polar G592 Manual De Instrucciones página 4

EN
Installation
Note: Not for use in vans or
trailers, food trucks or similar
vehicles.
Note: If the unit has not been
stored or moved in an upright
position, let it stand upright for
approximately 12 hours before
operation. If in doubt allow to
stand.
1. Remove the appliance from the packaging.
Make sure that all protective plastic film and
coatings are thoroughly removed from all
surfaces.
2. To optimize performance and longevity, ensure
a minimum clearance of 2.5cm is maintained
between the unit and walls and other objects,
with a minimum 20cm clearance on the top.
NEVER LOCATE NEXT TO A HEAT SOURCE.
Note: Before using the appliance
for the first time, clean the
shelves and interior with soapy
water then dry well.
3. Set the brakes on the castors to keep the
appliance in position.
Reversing the door (for G592/
G593)
Depending on the location of the appliance, it may
be necessary to change the direction the door
opens by changing the side of the door handle.
4
G592-G595_U632-U635_CC663_CD616_CW193-CW198_ML_A5_v16_20221021.indb 4 G592-G595_U632-U635_CC663_CD616_CW193-CW198_ML_A5_v16_20221021.indb 4
• Polar recommend that the reversal of
the door is carried out by a competent
person(s).
• Should a product issue occur as a result
of reversing the door, any repair action
would be chargeable.
• If you require an engineer to carry out
the task please call a Polar agent.
• If you proceed yourself we recommend
you follow the steps below once the
unit has been unplugged. Failure to
follow properly may void your warranty.
The door originally opens from the left side. To
reverse the door: (Tip: Images in this section are
for illustration only and may slightly differ from the
actual appliance appearances.)
1. Remove the 2 screws fixing the control panel,
then open the panel.
2022/10/21 15:23 2022/10/21 15:23