Siemens SIMATIC ET 200AL Instrucciones De Servicio Resumidas página 8

SIMATIC
Distributed I/O system ET 200AL
Compact Operating Instructions
Original instructions
1 Notes on Safety and Product Conformity
Function
SIMATIC products control, regulate and monitor applications in automation systems, for example in the field of industrial
automation technology and process engineering.
Documentation
The complete documentation for the I/O system consists of product information, the system manual, equipment and function
manuals. You can find these in the Manual Collection (https://support.industry.siemens.com/cs/ww/en/view/95242965) on
the Internet.
Firmware
You can find the latest firmware versions for the I/O system (for devices that support a firmware update) on the Internet
(https://support.industry.siemens.com/cs/search?t=all&search=et%20200al&type=Download&lc=en-WW).
Intended use
Use SIMATIC products only in industrial applications.
The product may be operated only by personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety information. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding potential hazards when working with these products.
WARNING
Intended use
SIMATIC products are intended for automation of machine plants, process control and process engineering. Refer to the
associated documentation (https://support.industry.siemens.com/cs/ww/en/view/95242965) to learn about the intended
area of application of the respective product (e.g. ambient conditions, possible use in safety-critical systems).
If third-party products and components are used, these have to be recommended or approved by Siemens.
Proper transport, proper storage, setup, assembly/disassembly, installation, commissioning, operation, maintenance and
decommissioning are required to ensure that the product and its accessories operate safely and without any problems.
Non-observance may result in death or serious physical injury.
Read the notes in the corresponding documentation (https://support.industry.siemens.com/cs/ww/en/view/95242965).
Observe the ambient conditions for intended operation as described in the "Technical specifications" section of the system
and equipment manuals.
WARNING
Connection of the power supply
The power supply may only be connected by qualified and authorized personnel. In particular, observe the information in
the documentation (https://support.industry.siemens.com/cs/ww/en/view/95242965) and on the nameplate of the device.
Note
The power supply must be connected by the operator/user in accordance with the national regulations regarding installation.
© Siemens AG 2022. All rights reserved
A5E51784822-AA, 03/2022
7