Maintenance; Filter Maintenance - RIDGID HDB6000 Manual Del Usuario

MAINTENANCE

FILTER MAINTENANCE

(Figs. 11A, 11B, 11C, & 11D)
WARNING:
!
To reduce the risk of injury from accidental
starting, unplug power cord before performing
filter maintenance.
1. Unplug power cord from power source.
2. Empty and inspect the dry filter bag (VFB600) (C)
every time you start and finish vacuuming (Fig. 11A).
Replace the dry filter bag (VFB600) if necessary.
A clogged and dirty filter restricts airflow and
results in reduced suction and overheating.
3. To replace with a new dry filter bag (VFB600):
Remove the used dry filter bag and discard.
Slide the new dry filter bag (VFB600) (C) into the
cloth filter (VFB102) (B) and secure into Backpack
Vac (A) (Fig. 11B).
4. As necessary, hand or machine wash the cloth filter
(VFB102) (B) and let it air dry. DO NOT put the
cloth filter in the dryer (Fig. 11C).
5. As necessary, clean the dome filter:
a. First, remove the dry filter bag and cloth filter from
the Backpack Vac (A).
b. Reach into the Backpack Vac (A) and pull
the dome filter grate off and remove the dome
foam filter (Fig. 11D).
c. Shake the dome foam filter, rinse it and let it
air dry thoroughly.
d. Once the dome
replace the dome foam filter onto the
dome filter compartment and firmly snap the
dome filter grate into place (Fig. 11D).
SP7128-1 HDB6000 ESF 2022.indb 14 SP7128-1 HDB6000 ESF 2022.indb 14
foam filter is dry,
14
Fig. 11A
(C)
(VFB600)
(C)
(A)
Fig. 11C
(B)
Dome
(VFB102)
(A)
Filter
(A)
6
QT
DRY / SEC / SECO
6.6
L
Dome Filter
Compartment
Fig. 11B
(B)
(A)
Fig. 11D
Dome
Filter
Grate
Dome
Foam
Filter
(A)
8/11/22 11:27 AM 8/11/22 11:27 AM