Using The Cooking Zones; The Heat Setting; Power Management Function; Powerboost - AEG IPE84571FB Manual De Instrucciones

10 www.aeg.com
Heat setting
1 - 2
3 - 4
5
6 - 9

5.3 Using the cooking zones

CAUTION!
Do not place hot cookware
on the control panel. There
is a risk of damage to the
electronic parts.
Place the cookware in the centre of the
selected zone. Induction cooking zones
adapt to the dimension of the bottom of
the cookware automatically.
Once the pot is detected, the heat setting
0 comes on.

5.4 The heat setting

Touch the control bar at the desired heat
setting or move your finger along the
control bar to set or change the heat
setting for a cooking zone.
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hours
Once you place a pot on the cooking
zone and set the heat setting, it remains
the same for 50 seconds after you
remove the pot. The control bar blinks for
the second half of that time. If you place
the pot on the cooking zone again within
this time, the heat setting reactivates.
Otherwise the cooking zone deactivates.
5.5 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum
electricity loading of 3680 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3680 W.
• The function decreases the power of
the other cooking zones connected to
the same phase.
• For cooking zones that have a
reduced power, the control panel
shows the maximum possible heat
settings.
• If a higher heat setting is not available
reduce it for the other cooking zones
first.
• The activation of the function depends
on the number and size of pots.

5.6 PowerBoost

This function activates more power for
the appropriate induction cooking zone,
depending on the cookware size. The
function can be activated only for a
limited period of time.