Attaching The Canopy; Assembly - Attaching The Blades - HAMPTON BAY 52144 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
7

Attaching the canopy

□
Align the locking slots of the canopy (B) with the two screws
(PP) and alignment post (EE) in the mounting bracket (A).
□
Push up the canopy (B) and turn clockwise until the
alignment post (EE) engages to the round hole and the
screws (PP) engage to the key slots.
□
Firmly tighten the two mounting screws (PP).
□
Install the decorative bottom cover (C) by aligning the cover slots with screws in the bottom of the canopy (B). Rotate the
bottom cover (C) clockwise to lock in place.

Assembly - Attaching the Blades

1
Attaching the blade bracket
□
Fasten the blade bracket (I) to the motor (E) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (E) and tightening the motor screws (GG) that are
pre-assembled to the blade bracket (I).
□
Repeat for the remaining four blade brackets (I).
EE
B
EE
C
E
E
I
GG
11
Please contact 1-855-HD-HAMPTON for further assistance.
A
PP
HAMPTONBAY.COM