Selecting The Display Language; Setting The Clock; Setting The Buzzer Volume - HURNER HST 300 GeoTherm+ 2.0 Manual De Instrucciones

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
period of validity 2 years from code issuance), or the
welding operation cannot be started, "off," that the
validity of the code is not checked at all.
"Memory Control on" means that when the system
memory is full of reports, the unit will be blocked until
the reports are printed or downloaded, "off," that it
works but that the oldest report will be overwritten.
"Welder Code Options – M – " means that by pressing the
MENU key, the user can access a sub-menu that allows
determining when the welder code, if it is enabled at
"Recording," has to be entered:always, i. e. before evey
single welding operation, only before the first welding
operation after switching the unit on or only after the
first welding operation of a new day/date.
"Language – M – " means that by pressing the MENU key,
the user can access a sub-menu for selecting the display
and report language (see Sect. 10.1.1).
"Date/Time – M – " means that by pressing the MENU key,
the user can access a sub-menu for setting the clock
(see Sect. 10.1.2).
"Buzzer Volume – M – " means that by pressing the MENU
key, the user can access a sub-menu for setting the
volume of the status buzzer (see Sect. 10.1.3).
"Temperature Unit – M – " means that by pressing the
MENU key, the user can access a sub-menu for select-
ing centigrade or Fahrenheit as the unit for the tem-
perature.
9.1.1

Selecting the Display Language

When the "Select Language" sub-menu was selected, the
screen changes and the display reproduced in Display 13
appears.
Use the arrow keys ñ and ò to select one of the options,
"Deutsch," "English," and "Français" and confirm by press-
ing the START/SET key.
9.1.2

Setting the Clock

When the "Set Clock" sub-menu was selected, the screen
changes and the display reproduced in Display 14 appears.
The time of day and the date can be set using the keypad.
The portions "Hour," "Minute," "Day," "Month," and
"Year" are set separately. Press the START/SET key to con-
firm your settings.
9.1.3

Setting the Buzzer Volume

When the "Set Volume" sub-menu was selected, the screen
Version September 2022 HÜRNER HST 300 GeoTherm + 2.0 User's Manual
Settings
>Check Cd Expiry on
Memory Control off
Wldr Code Option-M-
Display 10
*** SET-UP MENU ***
>Language -M-
Date/Time -M-
>Buzzer Volume -M-
Display 11
Settings
>Temp. Unit -M-
Display 12
**** LANGUAGE ****
>Deutsch
English
Francais
Display 13
Date/Time
21.06.13 14:28
Display 14
EN
17