699602_Topcase_K26_K28_K44_K71_klein_alle_Sprachen.fm Seite 15 Freitag, 30. September 2005 10:45 10
The locking lever
i.e. must point upward.
Close the Topcase lid
Press the locking lever
gages – the lid is now locked.
e
Caution
The red markings
visible.
Lock the Topcase – the key must be in the
"LOCK" position
Preparatory work on luggage rack of R 1200 ST
4
Pull the protective films off the included rub pro-
tection films
.
Apply the rub protection films
rack
.
L
Note
The gluing points must be clean, dust and
grease-free!
Preparatory work on luggage rack for
5
K 1200 GT
Unscrew the five screws
Remove the Topcase plate
Pull the protective films off the included rub pro-
tection films
.
Apply the rub protection films
overlap the dome
must be completely open,
and press on.
downward until it en-
must no longer be
, and remove the key.
to the luggage
.
.
so that they
.
Note
L
The gluing points must be clean, dust and
grease-free!
Warm the rub protection films
press on again firmly.
Mount the Topcase plate
Tighten the screws
.
X
Tightening torque
Screw
:
Mount/remove Topcase
6
Mount Topcase
Close the cover of the Topcase, see work step
Then turn the key clockwise to "RELEASE"
til the carrying handle
markings
become visible.
Pull up the carrying handle
This retracts the locking hooks
Place the Topcase
on the luggage rack
from above. The hooks
bars
of the luggage rack.
Now swing the Topcase
to rest on the luggage rack
buffers
.
Press the carrying handle
locking hooks
must extend and engage.
with hot air and
.
3 Nm
.
un-
jumps out. The red
as far as possible.
.
must grip under the
downward and allow it
with its rubber
downward — the
15
